APPLICATION

Clean the Surface thoroughly with 180 emery paper. Apply Admire Paints wall primer and allow it to dry for 3-4 hours. Smoothen the surface by applying 2-3 coats of Admire Paints Acrylic wall Putty giving 3-4 hours of drying time between each coat. Sand the surface with 180 emery paper and primer the surface again and allow it to dry for 3-4 hours. Apply 1st coat of ADMIRE Paints Archi Concrete without dilution using a steel trowel and allow it to dry for 45-60 mins. In a semi dry condition apply the 2nd coat of
ADMIRE Paints Archi Concrete and make the desired pattern using the required tools. Allow it to dry for 5-10 mins and buff the surface gently using a steel trowel without flattening the pattern. After 6-8 hours of complete drying apply 1st coat of Admire Paints Crown Imperial Protective Coat PC1 Clear diluted (1lit with 2lit water). After drying for 3-4 hours wet the surface with water before applying 2nd coat PC1 tinted diluted (1lit with 2lit water) using sponge roller & cw sponge in the direction of the pattern. Remove
excess material using wet CW sponge.

PRECAUTION

Do not apply when temperature below 10°C. Use of Stainers or colourants is not recommended. Thinning is not recommended. Do not keep material open for a long time. Product cannot be applied on surfaces/substrats that are subjected to continuous seepage or dampness. Stir well before use.